Dillon XL650/XL750 Case Ejector Powder Knob Pickup tube/Primer rod holder 3Pcs F
Dillon XL650/XL750 Case Ejector Powder Knob Pickup tube/Primer rod holder 3Pcs F
Regular price
$16.00 USD
Regular price
Sale price
$16.00 USD
Unit price
per
Couldn't load pickup availability
Enhance Your Dillon Reloader with Our High-Quality Parts
Designed to improve accuracy, expedite setups, and give you more control over your press, these three parts are a great addition to your Dillon Reloader. Each part is engineered for durability, using high infill rates, mixed infill settings, and all stainless hardware. Our goal is to provide you with parts that you only need to purchase once.
What You Will Receive:
2pcs Bearing/Bushing Type Case Ejectors
1pcs Powder Measurer Dial Knob
1pcs Wall-Mounted Primer Pickup Tube/Primer Follower Rod & Live Primer Tube Holder (Three holders for the price of one)
Unique Features:
Our Primer Pickup Tube/Primer Follower Rod & Live Primer Tube Holder is equipped with 10 slots for Primer Pickup Tubes, 2 slots for your Small/Large Primer Magazines Tubes, and 1 for the Primer Follower Rod.
1: It holds 13 tubes and 1 live primer follower rod.
2:Tubes are securely held in place with deep drop-down slots and a reverse ramp at the ends to prevent rods from accidentally falling out.
3: Save money by getting three holders in one part.
Our Powder Measure Knob fits any Dillon 7/16 (11.1mm) powder measure screw head.
Design Advantages of the Powder Knob:
1: It has easy-to-read markings on BOTH sides of the dial.
2: It features a setscrew and nut that locks the knob onto the powder measure’s screw head, ensuring a firm, tight connection that doesn’t get sloppy and makes switching to other hoppers fast and easy.
3: It has 45 indication marks on the back face, which is very useful if you decide to set up a pointer.
4:The dial is 1.600 inches in diameter by 0.450 inches thick for easy handling and a tight profile to the reloader.
5:All hardware is stainless steel.
Upgraded Case Ejector:
Our case ejector has been tested on .380 acp up to 45 acp, as well as .223/5.56. This 3D printed part is a redesign to fix issues encountered with some of the currently available ejector designs.
1:We moved the location of the setscrew and square nut, so you can access it when the shellplate has cases/rounds in it.
2:We added fillets and thickened up the area where the square nut is located to help prevent stretching.
3:We increased clearance between the ejector and the case insert slide to prevent binding and to ensure the case insert slide has full travel.
4:We increased clearance between the case insert slide and the finished round chute, allowing for more caliber uses and the ability to adjust rotation for the perfect case ejection.
The hardware is stainless steel.
In conclusion, our Dillon Reloader parts are designed with precision and durability in mind. We believe in providing you with products that enhance your reloading experience, improve your accuracy, and stand the test of time. We’re confident that once you try these parts, you’ll appreciate the difference they make. Thank you for considering our products. We look forward to serving your reloading needs.
Designed to improve accuracy, expedite setups, and give you more control over your press, these three parts are a great addition to your Dillon Reloader. Each part is engineered for durability, using high infill rates, mixed infill settings, and all stainless hardware. Our goal is to provide you with parts that you only need to purchase once.
What You Will Receive:
2pcs Bearing/Bushing Type Case Ejectors
1pcs Powder Measurer Dial Knob
1pcs Wall-Mounted Primer Pickup Tube/Primer Follower Rod & Live Primer Tube Holder (Three holders for the price of one)
Unique Features:
Our Primer Pickup Tube/Primer Follower Rod & Live Primer Tube Holder is equipped with 10 slots for Primer Pickup Tubes, 2 slots for your Small/Large Primer Magazines Tubes, and 1 for the Primer Follower Rod.
1: It holds 13 tubes and 1 live primer follower rod.
2:Tubes are securely held in place with deep drop-down slots and a reverse ramp at the ends to prevent rods from accidentally falling out.
3: Save money by getting three holders in one part.
Our Powder Measure Knob fits any Dillon 7/16 (11.1mm) powder measure screw head.
Design Advantages of the Powder Knob:
1: It has easy-to-read markings on BOTH sides of the dial.
2: It features a setscrew and nut that locks the knob onto the powder measure’s screw head, ensuring a firm, tight connection that doesn’t get sloppy and makes switching to other hoppers fast and easy.
3: It has 45 indication marks on the back face, which is very useful if you decide to set up a pointer.
4:The dial is 1.600 inches in diameter by 0.450 inches thick for easy handling and a tight profile to the reloader.
5:All hardware is stainless steel.
Upgraded Case Ejector:
Our case ejector has been tested on .380 acp up to 45 acp, as well as .223/5.56. This 3D printed part is a redesign to fix issues encountered with some of the currently available ejector designs.
1:We moved the location of the setscrew and square nut, so you can access it when the shellplate has cases/rounds in it.
2:We added fillets and thickened up the area where the square nut is located to help prevent stretching.
3:We increased clearance between the ejector and the case insert slide to prevent binding and to ensure the case insert slide has full travel.
4:We increased clearance between the case insert slide and the finished round chute, allowing for more caliber uses and the ability to adjust rotation for the perfect case ejection.
The hardware is stainless steel.
In conclusion, our Dillon Reloader parts are designed with precision and durability in mind. We believe in providing you with products that enhance your reloading experience, improve your accuracy, and stand the test of time. We’re confident that once you try these parts, you’ll appreciate the difference they make. Thank you for considering our products. We look forward to serving your reloading needs.
